Su carro

Carro vacio

Como comprar

Servicio Atención al cliente

OPPO DV-980H FIRMWARE RELEASE

Note: All the firmwares are for European Version

-------------------------------------------------------

Latest Version:

Release Date: Aug 01, 2009

BES980-19-1122(click here)

Summary of This Release:

1. Fixes audio drops while MP3 palyback via USB.

All new features and improvements from the previous firmware versions are also included in this revision.

-------------------------------------------------------

Previous Version:

Release Date: July 28, 2008

BES980-10-0728(click here)

Note: Follow the Update Instructions (using USB or CD-R) at the bottom of this page:


Summary of This Release:

The following new features and improvements are included in this version:

1. "Auto" Output Resolution
The player's default output resolution is now set to "Auto". With this setting, the player checks with the display device to determine the best output resolution over HDMI output. Experienced users, users who play both PAL and NTSC contents, and users who use the component output should still manually select an output resolution to ensure the best picture quality.

2. Stability Improvement
This firmware version addresses a problem of unable to resume playback after a movie is stopped in the "pre-stop" mode for a period of time. When a user presses the "STOP" button once during a movie to put it in the "pre-stop" mode, playback should resume if the user presses the "PLAY" button. With the previous firmware versions, occasionally playback will not resume upon pressing the "PLAY" button. Instead, the user needs to press the "EJECT" button twice to resume the movie. This version resolves the problem, and playback from "pre-stop" mode can be resumed reliably by pressing the "PLAY" button.

3. Bass Management for 96k Source
This firmware version optimizes the DSP (Digital Signal Processor) usage and adds bass management for audio sources that are encoded in 96kHz sample rate. When the front speakers are set to "Small" and subwoofer is set to "On", the DV-980H can redirect bass from the front channels to the LFE subwoofer channel. This improvement applies to DVD-Video and DVD-Audio discs. It is in addition to bass management already supported in previous firmware releases for sources with less than 96k sample rate (CD, DVD-Audio/Video and SACD).

4. Improved Transition between Audio Tracks
This firmware version improves the transition between audio tracks. For CD, the improvement is noticeable on certain discs that have very tight transition between two tracks, and discs that start with a very strong note. For SACD, the improvement honors the gap flag inserted between two tracks (often found between two symphony pieces on a classical music SACD), while at the same time maintains a gapless transition if no such flag exists.

5. HDMI Output for X.0-Channel SACD and DVD-Audio Discs
This version changes the way DV-980H outputs audio over HDMI for X.0-Channel (3.0, 4.0, 5.0 etc.) SACD and DVD-Audio discs. The previous version outputs 2.0-Channel for these disc over HDMI. The new version outputs 5.1-Channel with the unused channel muted. Multi-channel analog output for such discs had no problem before and is not affected by this change.

All new features and improvements from the previous firmware versions are also included in this revision.


Do-It-Yourself (DIY) Update Instructions
------------------------------------------------------------------------------------
Before You Start::
Warning: Although DIY firmware upgrade is an easy and usually trouble-free process, an improper or failed firmware upgrade could render the DVD player unusable. Choose DIY only if you are aware of and accept the risks of performing DVD player firmware upgrade. Otherwise, you can contact OPPO authorized resellers to send the player back for the upgrade.
Follow the instructions EXACTLY; Don't press the "Open/Close" key until the player reboots itself. The entire process takes between 3-4 minutes. Stay focused and be patient during this process. Make sure the AC power connection is secured; use an Uninterrupted Power Supply (UPS) from your PC if necessary (in areas where AC is not stable). Do not interrupt power on the DVD player during the update process. The firmware will have factory default settings that may be different from the settings you currently have. You may want to note your current settings as you will have to reconfigure them after installing this firmware.
-------------------------------------------------------------------------------------

To find your DVD player's firmware version:

  1. Switch on the player and connect it to your TV.
  2. Press `setup´ on your remote control.
  3. Punch in the number 9210 on your remote control. Now you will see the firmware version displayed on the screen.
  4. Compare it with the firmware version that you already have in the player. If the player have an older version, proceed further!
  5. (Press `setup´ again to exit.)
 

USB Upgrade Instructions

  1. Download the firmware version of your choice.
  2. Copy the downloaded file to a USB thumb drive (or a flash memory card if you have a compatible card reader). Re-name the firmware to 935.BIN It is important that you must use UPPER-CASE characters for the file name.
  3. Turn on your TV display and the OPPO player. Insert the USB thumb drive or flash memory card reader to the USB slot. Open the player tray, and then close the tray with no disc in it.
  4. The player will find the firmware file on the USB thumb drive or flash memory card. You will see "Press Play To Start" on your TV display. Press the PLAY key on the remote or the player once. The TV display shows "File Copying" and then "UPGRADING."
  5. When the front panel display of the OPPO player starts counting "01/32", "02/32" and so on, remove the USB thumb drive or flash memory card reader from the USB slot. DO NOT DO ANYTHING ELSE. What follows is the process when the player will reboot itself.
  6. DO NOT PRESS ANY BUTTONS NOR ATTEMPT TO CLOSE THE TRAY NOR UNPLUG THE POWER DURING THE REMAINING UPGRADE PROCESS.
  7. After approximately 1 - 2 minutes, the player reboots itself to complete the process. The update process is completed when the front panel of the DVD player shows "No Disc".
  8. Press the "OSD" button on the remote control to verify the new firmware version.
  9. The new firmware may affect your HDMI output resolution and setup menu settings. To ensure you have the correct settings, turn off and then turn on the player. Press the HDMI button on the remote control to set the desired output resolution. Adjust the setup menu settings if necessary.
  10. Congratulations! You have just completed the firmware upgrade.

 

CD-R Upgrade Instructions:

  1. Download the firmware version of your choice.
  2. Before recording the file to an empty disc, re-name the firmware to 935 (It is important that you rename the file!)
  3. Record the firmware copy on to a single disc (use a new, empty disc) use:: CDBurnerXP Pro (choose ISO level 1 instead of ‘Joliet') CDBurner::Click here for more help or Nero Burning ROM (choose `ISO 9660 only`) Nero::Click here for more help
  4. Switch on the DVD PLAYER, and open the tray.
  5. Put the firmware disc to tray and close the tray.
  6. Waiting, while the update help message display on TFT, press the "PLAY" button. The help message on screen will show "FILE COPY"
  7. After the files are copied(30 sec), the tray will eject automatically. Take out the disc and wait till the tray closes automatically!! The OSD Will show "Waiting, Update......." Note: At this time, updating doesn't finish. Must not power down it
  8. Waiting(2-3 min), when the update is finished, the DVD player will reset automatically.
  9. Switch off the DVD PLAYER
  10. Congratulations! You have just completed the firmware upgrade.



-----------------------------------------------------------------------------------

2010-09-09

  • Idioma Svenska English Deutsch Italiano Español Francais